Lunan Xinli Machine Tool Co., Ltd
Address: South End of Yikang Avenue, Tengzhou City, Shandong Province, China
Phone: 086-0632-5992019
Fax: 086-0632-5992018
Mobile: 086-13589611735
Email: xc365@139.com
Business QQ: 104886200
Contact person: Manager Li
The hydraulic shearing machine is based on the moving upper blade and the fixed lower blade, and uses a reasonable blade gap to apply shear force to the metal sheet of various thicknesses, so that the sheet is broken and separated according to the required size.
Classification of shearing machines
1. Classification according to the shape of scissors shearing machine according to the shape of scissors is divided into straight knife shearing machine and disk knife shearing machine. Straight knife shearing machine is divided into gantry shearing machine and throat shearing machine according to structure. According to the structure of the disk knife shearing machine is divided into disk shearing machine, rolling shearing machine, multi-disk shearing machine and rotary trimming shearing machine.
2. According to the motion trajectory of the tool holder classification shearing machine according to the motion trajectory of the tool holder is divided into the following types:
(1) The tool holder moves along the vertical line, because there is no forward inclination Angle, so the upper blade section must be processed into a diamond, so there are only two blades (rectangular blades with four blades are also available, but the shear quality is poor), and the shear fracture of the tool holder is not at a right Angle to the plate surface.
(2) The tool holder moves along the forward inclination line (the Angle between the vertical line is 1°30 '~ 2°), the upper blade section can be processed into a rectangle, with four blades, and the shear fracture is basically at a right Angle to the plate surface.
(3) The tool holder swings along the arc line, the shear blade section should be processed into a diamond shape, so there are only two blades, because the upper blade is slightly forward in the shear process, so the shear quality is similar to the movement of the tool holder along the forward inclination line.
(4) The tool holder swings along the arc line, and the front Angle can reach 300, so the welding groove can be cut out
3. According to the transmission mode of classification shearing machine according to the transmission mode is divided into: mechanical transmission shearing machine and hydraulic transmission cutting trigger
Lunan Xinli Machine Tool Co., Ltd
Address: South End of Yikang Avenue, Tengzhou City, Shandong Province, China
Phone: 086-0632-5992019
Fax: 086-0632-5992018
Mobile: 086-13589611735
Email: xc365@139.com
Business QQ: 104886200
Contact person: Manager Li
Copyright2021 - 2030：
Lunan new power machine tool co., ltd. 鲁ICP备15001187号-1
